background image

Component List

1. Air inlet
2. ON/OFF switch
3. Handle
4. Air outlet
5. Locking catches
6. Debris drum
7. Hose

8. Crevice tool
9. Square nozzle
10. Round brush
11. Filter bag
12. Rubber band

1

2

3

4

5

6

7

8

9

10

11

12

Technical specification

Rated voltage: 

220-240V AC

Rated power: 

800W

Rated frequency: 

50Hz

Protection class: 

Class II

Degree of protection:  IPX5
Cable length: 

3m

Hose length: 

1.2m

SECTION 2 – WET & DRY VAC

SAFETY AND WARNING INFORMATION

COMPONENTS

General Safety Rules

WARNING: Read the instructions fully before using the product for the first time. Failure to follow 

the instructions may reslut in fire, electric shock and or serious injury.

We recommend the user wears safety equipment during use.

We recommend the product be used with a RCD (Residual Current Device).

Please retain these instructions for future use and referral.

-  Don’t use this machine to clean up cement, gypsum powder or other substances likely to block 

  the filter. A blocked filter can cause damage to the motor. If these types of substances are 

  blocking your filter, clean immediately.

-  Do not bend, tread on or pull the hose. If the hose is damaged relpace it immediately.

-  Do not allow large objects to become lodged in the air inlet or hose. If a large object does 

  become lodged, turn off the machine immediately or the motor may be damaged. The machine 

  must be unplugged before any attempt is made to dislodge the blockage.

-  Do not allow too much water to be absorbed when cleaning wet debris. Empty the debris drum 

  as soon as it is full.

 

WARNING: Do not at any time invert the machine when it contains wet debris!

-  Do not expose this machine to extreme temperatures.

-  Clean with a damp cloth only.

-  When removing the mains plug from a socket grip the plug itself, do not pull on the cable.

-  If the cable is damaged do not use the machine.

-  Repairs should only be carried out by a qualified person.

-  To reduce the risk of electrocution, keep all connections dry and off the ground.

-  Do not touch plug with wet hands.

-13-

-14-

All manuals and user guides at all-guides.com

Содержание HP101










Отзывы: