v1.0.0
25. TRANSIENT AMOUNT
Attenuverter
26. HPF TRACK Switch
When enabled, the HPF will track 1V/oct of
the TUNE input jack post-attenuverter.
27. HPF CUTOFF FREQUENCY
Knob
2nd order HPF. The HPF range is to ~1kHz.
Offset control.
28. EQUALIZER (Gap Filter)
SPAN Knob (Inner)
The GAP filter is our answer to mid sculpting.
Think of it as a gap or canyon in the mid
frequencies. SPAN is how wide the gap is.
The more Span, the more ‘mids’ are cut out of the signal’s spectrum. We have added a very slight
amount of overlap at the minimum settings of Span to give ‘negative span’. This gives no gap and
instead slightly boosts the frequency set by Position (in other words, it can operate as a slight mid
boost). Offset control.
29. EQUALIZER (Gap Filter) POSITION Knob (Outer)
The Position control adjusts the LPF side of the gap filter. Offset control.
30. EQUALIZER (Gap Filter) SPAN Attenuverter
