Rabe Digger HA, Руководство по эксплуатации

Страница: 18 / 25

We reserve the right to make technical changes.
6
Maintenance
Switch off the engine and remove the ignition key
before working on the attached implement.
Do not work under a non-secured raised imple-
ment.
Provide the raised device with additional support to
prevent accidental dropping.
Before working on the hydraulic system, lower the
device and release the hydraulic pressure. Do not
attempt to replace tyres without adequate expertise
or the right tools. Dispose of anti-freeze and waste
oil correctly.
After initial startup (approx. 8 h), retighten all screws
and bolts, then check for tightness at regular inter-
vals.
Apply a grease gun to all bearing lubrication nipp-
les at regular intervals; the wheel bearings must be
lubricated once a year (remove the wheel hubs).
Check the wheel bearings (tapered roller bearings)
and adjust as required. These hoses are subject to
a natural ageing process and should in any case
be replaced after 5-6 years, regardless of their
apparent condition.
Residual risks
Danger zone Note
Shut down the enti-
re device
Operating Instructions:
Attachment and removal
Connection of the
complete device
Operating Instructions:
Safety precautions
HA: Stone guard
Operating Instructions:
Hydraulic stone guard
Do not carry out modifications on the hydrau-
lic buffer (6.1/1) by machining, welding or other
procedures. The liquid pressure in the hydraulic
buffer must be completely released before work
of any kind is carried out on the hydraulic circuit.
All maintenance, servicing and / or the removal of
components must be carried out by properly-trai-
ned personnel.
6.1
1