RabbitCore RCM2300, Руководство по началу работы

Страница: 19 / 31

Getting Started Manual 15
3.3 Installing Dynamic C
Insert the Dynamic C CD-ROM in the drive on your PC. If autorun is enabled, the CD
installation will begin automatically.
If autorun is disabled or the installation otherwise does not start, use the Windows
Start > Run
menu or Windows Explorer to launch
SETUP.EXE
from the root folder of the
CD-ROM.
The installation program will guide you through the installation process. Most steps of the
process are self-explanatory and not covered in this section. Selected steps that may be
confusing to some users are outlined below. (Some of the installation utility screens may
vary slightly from those shown.)
3.3.1 Program and Documentation File Location
Dynamic C’s application, library and documentation files can be installed in any conve-
nient location on your workstation’s hard drives.
The default location, as shown in the example above, is in a folder named for the version
of Dynamic C, placed in the root folder of the C: drive. If this location is not suitable, enter
a different root path before clicking
Next > . Files are placed in the specified folder, so do
not set this location to a drive’s root directory.