13W LED WALLPACK INSTALLATION INSTRUCTIONS
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct.
Refer to wiring directions.
2. Is the fixture is grounded properly?
3. Is the photocell is functioning properly (if used)?
WPLED13-IN-0510
Easy Installation & Product Help
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool
enough to touch. Do not clean or maintain while
fixture is energized.
1.
Clean glass lens with non-abrasive glass cleaning
solution.
2.
Do not open fixture to clean the LED. Do not touch
the LED.
LIGHT
FIXTURE
(+)LINE
BLACK
(-)COMMON
WHITE
GROUND
GROUND
WIRING
Universal voltage driver permits operation at 100 to
277VAC, 50 or 60Hz.
1.
Connect the black fixture lead to the (+) LINE
supply lead.
2.
Connect the white fixture lead to the (-) COMMON
supply lead.
3.
Connect the bare copper Ground wire from fixture to
supply ground.
JUNCTION BOX
1.
The Junction box has (4) conduit entry points
on the center of each side and (1) in the center
back.
2.
Mounting Points
are dimensioned below
.
US: pat D608,040, CA: Pat. Pending, CN: Pat. Pending, TW:
Pat. Pending
4 3/4”
2 3/16”
3 1/2”
1 1/8”
1 1/8”
Mounting Points
RAB
1064
15
71
66
4828 (Daylight)
WVMA-RWDGHD
WPLED13
Outdoor wall-mounted area fixtures ("wall packs")
RAB
662
15
44
87
3090 (Bright White)
WVMA-21XW6K
WPLED13Y
Outdoor wall-mounted area fixtures ("wall packs")
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
