COMPACT LED TUBES
P L C - 9 - V - 8 2 7 - B Y P
P L C - 9 - V - 8 3 0 - B Y P
P L C - 9 - V - 8 3 5 - B Y P
P L C - 9 - V - 8 4 0 - B Y P
P L C - 9 - V - 8 5 0 - B Y P
155x185
1
Model
Name
Installers should not disconnect existing wires from
lampholder terminals to make new connections at
lampholder terminals. Instead installers should cut
existing lampholder leads away from the lampholder and
make new electrical connections to lampholder lead wires
by employing applicable connectors.
Do not make or alter any open holes in an enclosure of
wiring or electrical components during kit installation.
THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT
OF A LUMINAIRE WHERE THE SUITABILITY OF THE
COMBINATION SHALL BE DETERMINED BY
AUTHORITIES HAVING JURISDICTION.
maximum one tubular lamp. The minimum lamp compartment dimensions
are tabulated below:
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:(1)this device may not cause harmful interference,and (2)this device must accept any
interference received, including interference that may cause undesired operation.
WARRANTY
This product is warranted for 5 years from the date of purchase.If this product does not
perform t
kage, send an email or write to the
address below for product return and replacement. This replacement is the sole remedy
available. Liability for incidental or con- sequential damage is expressly excluded.
PLC-9-V-8XX-BYP
[Diameter x Height] [mm]