2
Setup & Installation
(Cont’d)
Turn power on
3
Enable Device Pairing Mode
Lightcloud Blue Logo
For the first time use, the Lightcloud
Blue 5-Pin Plug-in PIR Controller is
ready to be paired as soon as it is
powered on. If your Lightcloud Blue
Plug-In PIR Controller is already
paired, you can reset it by using the
Rapid Reset Tool Method. The rapid
reset process must be done by
professional electricians qualified by
RAB. Reach out to your RAB sales
manager to request a Rapid Reset
Tool. The tool simply needs to be
placed directly on the Lightcloud
Blue 5-Pin Plug-in PIR Controller for 2
seconds. The lamp will flash 3 times,
then reset to 100% brightness at
default CCT of 3000K.
