INSTRUCTIONS
LFLED® 4LV INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
WIRING
Note:
These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
CLEANING & MAINTENANCE
TROUBLESHOOTING
CAUTION: Be sure fixture temperature is cool enough to
touch. Do not clean or maintain while fixture is energized.
1.
Clean glass lens with non-abrasive glass cleaning solution.
2. Do not open the fixture to clean the LED. Do not touch the
LED.
1. Check that the line voltage at the fixture is correct. Refer to
wiring directions.
2. Keep leaves and debris out of hood.
LFLED4LV - IN - 0223
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2023 RAB LIGHTING Inc.
RAB WARRANTY:
RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.
73105-RAB
The driver permits operation at
12 VAC ONLY
. Wire LFLED4LV
using approved wiring devices for SPT-1 cord.
Use approved wiring devices for SPT-1 cord.
Reflector door lens kit can be ordered separately:
LNSLFLED8
15° spot reflector, door, lens kit for LFLED4LV
LSLFLED8
20° spot reflector, door, lens kit for LFLED4LV
ACCESSORIES
Fig: 3