INSTRUCTIONS
HIGH BAY - EMERGENCY BATTERY BACKUP
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
Type B Pole Mount
Type C Ring Mount
Hook up
Terminal
Rings
Type A Pole Mount
Hook up
OPERATION INSTRUCTIONS
REMOTE CONTROL USE
(included)
Test switch and indicator:
Red On : Charging mode
Red Off : Discharging mode
WIRING DIAGRAMS
LED DRIVER
Black (AC-L)
White (AC-N)
Green (Earth)
Purple (Dim+)
Pink (Dim-)
Test Switch&
Indicator Light
Green(Ground)
Green(Ground)
Green(Ground)
Red(12Vdc Out)
12V AUX
BLACK(UNSWITCH HOT)
BLACK(AC-L)
WHITE(AC-N)
WHITE(AC-N)
Pink(Driver Dim-)
Purple(Driver Dim+)
0-10V Dimming Output
AC Input
0-10V Dimming Input
0-10V
DIMMER
Red(SWITCH HOT)
Wall Switch
Purple(DIM+)
Pink(DIM-)
Dimmer-
Blue(Driver N)
Brown(Driver L)
Cap off if not connected
EMERGENCY DRIVER
IMPORTANT: Dimming wires must be connected to Fixture LED Driver dimming wires for EM to function properly.
RECOMMENDATION: Emergency output power >20% output power of LED High Bay.
FOR HIGH BAY WITH SENSOR
(100-277VAC)
FOR HIGH BAY WITH WALL SWITCH
(WITHOUT DIMMER)
•
Press the On button to test emergency function. The light will switch to
its emergency lighting and the indicator light will turn Off . Press the OFF
button, the light will recover to normal lighting. When the main supply
(unswitched-hot)
is off
(emergency mode)
, press the OFF button to turn off
emergency function.
•
Remote must be pointed at the indicator light and be within a
45-degree angle to receive a signal/command. Remote requires two
(2)
AAA batteries to operate
(not included)
.
