INSTRUCTIONS
HIGH BAY - EMERGENCY BATTERY BACKUP
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for
safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fi xture. No user-serviceable parts inside.
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS
WARNING:
AC power must be off before proceeding with assembly or installation of emergency LED driver.
IMPORTANT:
An unswitched AC power source of 120VAC to 277VAC is required. This device is designed for use in fi xtures listed for dry,
damp and wet locations.
IMPORTANT:
Emergency LED driver should be charged for 24 hours every 6 months during storage.
CAUTION:
•
Make sure all electrical connections confi rm to the National Electrical Code and all applicable local regulations.
•
Do not let power supply cords touch hot surfaces.
•
Do not mount near gas or electric heaters.
•
Use with grounded UL Listed dry, damp or wet location rated fi xtures.
•
The equipment is intended for ordinary locations and for permanent installation into one or more listed emergency luminaires.
•
Battery is rechargeable Li-ion type and must be recycled or disposed of properly.
Do not use this emergency driver with accessory equipment other than recommended by manufacturer; failure to follow this may
cause an unsafe condition. Servicing should only be performed by qualifi ed service personnel. Do not use this emergency driver for
other than intended use.
IMPORTANT:
Indicator
(LED light)
illuminated indicates battery in charge mode when AC power is applied. It is recommended and
required by applicable code to test emergency LED driver to ensure proper function of the system; push the test switch every thirty
(30)
days to ensure the emergency driver is functioning by illuminating the light source. Conduct a ninety (90) minutes discharge test one
(1)
time per year; LED light source should be illuminated for 90 minutes.
TESTING SYSTEM:
The emergency battery requires a charge minimum of one
(1)
hour before testing the circuit. A full charge requires
twenty-four
(24)
hours.
EMHB30
