YBLED 40W-60W INSTALLATION INSTRUCTIONS
®
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
YBLED-IN-1217
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough
to touch. Do not clean or maintain while fixture is
energized.
1. Clean polycarbonate refractor with non-abrasive
cleaning solution.
2. Do not open the fixture to clean the LED. Do not touch
the LED.
ACCESSORIES
24” Yardblaster Arm:
YARM24
TROUBLESHOOTING
1. Check that the line voltage at the fixture is correct. Refer
to wiring directions.
2. Be sure fixture is grounded properly.
3. Be sure the photocell is functioning properly?
Note: These instructions do not cover all details or variations in
equipment nor do they provide for every possible situation during
installation, operation or maintenance.
WIRING
Universal voltage driver permits operation at 120V to 277VAC,
50 - 60 Hz.
1. Connect the bare copper Ground wire from fixture to
supply ground.
2. Connect the BLACK fixture lead to the LINE supply lead.
3. Connect the WHITE fixture lead to the COMMON supply
lead.
Pat: D 713019
Easy Answers
rabweb.com
Visit our website for product info
Tech Help Line
Call our experts - 888 722-1000
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2017 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
