LOTBLASTER LTHS HOUSE SIDE SHIELD
INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
™
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. This product must be installed in accordance with the applicable installation code by a person familiar with the
construction and operation of the product and the hazards involved.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
LTHS
MOUNTING HOUSE SIDE SHIELD TO HOUSING
Follow steps below to mount the
House Side Shield LTHS (2)
to Lotblaster Housing -
1.
Remove
Screws (8x2)
from
Lens (2)
using Center Pin Torx Screwdriver (not supplied).
2.
Orient the
LTHS (2)
as shown below on
Lens (2)
. Ensure the shield is towards the mounting surface (pole).
Warning: Do NOT remove or change orientation of the
Lens (2)
.
3.
Tightly secure
Screws (8x2)
.
LTHS (2)
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough to touch. Do not clean or maintain while fixture is energized.
1.
Lens should be washed in a solution of warm water and any mild, non abrasive household detergent, rinsed with clean water
and wiped dry.
2.
Do not open fixture to clean the LED. Do not touch the LED.
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2016 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during
installation, operation or maintenance.
LTHS IN 1216
Pending: Patent pending
Screws (8x2)
Lens (2)