LFLED8 INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required
for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING:
Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
WALL MOUNTING
Mount to a weatherproof junction box and cover plate (not
supplied) as shown. To ensure weatherproof seal, apply
weatherproof silicone sealant around the edge of the wall
cover plate or surface box. This is especially important with
an uneven wall surface.
1. Seal arm thread using Teflon tape or silicone sealant.
2. Thread fixture into
Cover Plate
(not supplied).
3. Connect wires as shown in the wiring diagram.
4. Attach cover plate to
Junction Box
(not supplied).
5. Aim floodlight in the direction desired and tighten
locknut and
Arm Screw
.
Cover Plate
(not supplied)
GROUND MOUNTING
Mount to a Mighty Post (RAB Cat# MP19) as shown.
1. Thread fixture into
Mighty Post Cap
.
2. Connect wires as shown in the wiring diagram and place
inside the
Mighty Post
.
3. Place
Mighty Post Cap
on the
Mighty Post
.
4. Aim floodlight in the direction desired and tighten
locknut and
Arm Screw
.
Junction Box
(not supplied)
Mighty Post Cap
Mighty Post
Arm Screw
Arm Screw
