![background image](http://html1.mh-extra.com/html/rab-lighting/lfled5mbr/lfled5mbr_installation-instructions_3116744002.webp)
LFLED5MBR INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
MOUNTING Of jUNcTION bOx
To ensure weatherproof seal, apply weatherproof
silicone sealant around the edge of the
Junction Box
.
This is especially important with an uneven wall surface.
1.
Attach the
Junction Box
through the
Mounting
Tabs
to mounting surface with appropriate
hardware. Be sure the
Wall Gasket
is in place.
Dimensions for drilling are shown on reverse.
2.
Attach
Cover Plate
to
Junction Box
with 10-24
1/2” brass screws provided. Be sure the
Cover plate
Gasket
is in place.
3.
All conduit entries are 1/2” NPS. Close all unused
entries with provided
Plugs
. Seal all conduit entry
thread using Teflon tape or silicone sealant.
RAB LIGHTING
BRASS JUNCTION BOX
12/18/2012
RAB LIGHTING
BRASS JUNCTION BOX
12/18/2012
Wall
Gasket
Junction
Box
Cover Plate
Gasket
Plug
Cover Plate
Mounting Tab
RAB LIGHTING
BRASS JUNCTION BOX
12/17/2012
4.50
114,3
[
]
45.0°
.30
7,6
[
]
1.59
[40,4]
1.59
[40,4]
DrIllING TeMplaTe fOr jUNcTION bOx
The template below is not to scale. Use dimensions below.
45.0
°
1.59”
(40.4)mm
0.3”
(7.5)mm
4.5”
(114.3)mm
1.59”
(40.4)mm