background image

Limited Warranty

170 Ludlow Avenue
Northvale, NJ 07647        
The unit should be
packed carefully. Please
include your sales
receipt and a descrip-
tion of the problem.
If your unit is out of war-
ranty or the damage is
unrelated to the 
original manufacture,
return your unit directly

Your Gotcha will be
replaced or repaired, at
our option, if it proves 
to be defective in work-
manship or materials
within five years from
the date of original pur-
chase.
For repair or replace-
ment, return the product
freight prepaid and
insured to:
RAB Lighting

RAB Lighting

170 Ludlow Avenue, Northvale, NJ 07647 USA

© RAB Lighting 2004 

Toll Free Phone

Call our friendly experts
8AM-6PM ET Mon.-Fri.

888 RAB-1000

Toll Free Fax

Send faxes to RAB
24/7

888 RAB-1232

Fax On Demand

Faxed Information,
24/7

888 RAB-1236

E-mail

Questions and requests
answered promptly

[email protected]

www.rabweb.com

Visit our internet site
for product information

Easy Installation & Product Help

Contents of Accessory Kit

• 3 Wire Nuts

• Crossbar

with Green Ground Screw

• Hanging Hook
• 1/2” Close Up Plugs (3)
• Slotted Screws (5)
• Finishing Cap
• O-ring Gasket

• Foam Gaskets (2)

• Metal Plate

(for surface junction box mounting)

Содержание GT500













Отзывы: