5
e.
Check that the outer edge of your pendant
flashes red after each button press.
This indicates that the pendant works at
these locations.
f.
When completed, press the
button on the unit once to end the process.
Note:
As a safety feature, Test Mode will time out after ten
minutes. To enter back into Test Mode, repeat
Step 4,
a
.
Tips:
You can cancel a false alarm by pressing the CANCEL button
within the 10 second pre-alarm stage. Otherwise, wait for the
system to connect you to an RAA operator and communicate with
them by speaking to the base unit.
STEP 5: Making a Test Call and Completing
Installation
a.
Press and hold the button on your
pendant for 3 seconds - you will hear
a loud alarm.
Do not press the yellow
CANCEL button as this will stop the
alarm connecting to RAA
. The loud
alarm will sound for ten seconds and
then you will be connected to an
RAA operator.
b.
When you have been connected to
RAA, inform the operator that you are
testing your new Personal Alert
System.
c.
Communicate with the operator by speaking to the base
unit.
d.
Unless the operator advises you that there is a problem
with the unit, EVE is ready to use.
