3
to release it. A click, press-hold-release or a click, press and hold are
a click followed by the press in rapid succession. There is no pause
or delay between the click and the press. The same applies to
double-click, press-hold-release and triple-click, press-hold-release.
You tell your flashlight what to do through a sequence of clicks and/or
a press-hold-release or a press and hold. These sequences, known
as commands are simple and easy to learn. It will take a few minutes
of practice to become proficient with them.
From Off:
these commands are available when your flashlight is
turned off:
•
Click – turns on your flashlight to the High brightness setting.
•
Press and hold – turns on your flashlight to the High brightness
setting for as long as you hold down the button and then turns your
light off again when you release the button.
•
Click, press and hold – turns on your flashlight to the Strobe setting
for as long as you hold down the button and then turns your light
off again when you release the button.
From On:
these commands are available when your flashlight is
turned on:
•
Click – turns off your flashlight.
•
Double-click – toggles between the High and Medium brightness
settings or returns you to the last High or Medium brightness
setting used.
•
Triple-click – goes to the Low brightness setting.
•
Click, press-hold-release – goes to the Strobe setting.
•
Press and hold – goes to the Strobe setting for as long as you hold
down the button and then returns to the previous brightness setting
when the button is released.
Please refer to Customizing Your Flashlight, below, for detailed
instructions on customizing your flashlight.
Note:
your flashlight will turn on burst output whenever you select the
High brightness setting. After 10 seconds of burst output, the output is
