R82 X Panda 4 Скачать руководство пользователя страница 5

Страница: 5 / 8

Mounting instruction

Mounting hip supports for x:panda 4

Follow the instructions below to mount the hip supports:

1. Dismount the standard hip supports by unscrewing (A) by the

means of the Allen key that came with the chair. When the supports

have been removed the screws can be remounted in the fittings

for possible later use.

2. Dismount the arm rest bars from the fitting on the chair by

loosening the handle/screw (B) by hand, and then the arm rest

bar is removed.

3. Mount the hip support on one of the rods of the arm rest bar (of

your own choice) and the handle/screw (C) is tightened by hand.

4. Mount the arm rest bars in the fitting on the chair again and tighten

the handle/screw (B) by hand.

5. Use the enclosed 3 mm Allen key to loosen the screws (D) and

adjust the depth in the slots and fasten in the required position.

6. The hip supports are multi-adjustable by moving the handles

(E) up/down. The desired position is found and if necessary the

fittings are tightened before the handles are moved up/down again.

Any adjustments and addition of accessories must be placed

and fitted correctly and checked before every use.

Содержание X Panda 4








