16
A
C
E
F
B
D
G
B
PANDA FUTURA 5
ON COMBI FRAME
SIZE 4
Follow the instructions below to mount an interface
for Panda Futura 5 on a frame
1. Mount the interface on the frame as shown on
picture (A). Fasten the interface together with the
enclosed metal plates (B) on the seat base. Place
the enclosed bolts from the top and fasten with
a nut beneath the seat base. Fasten all screws
securely using a 4 mm Allen key and a 10 mm
spanner.
2. The interface can be moved 5 cm backwards and
forwards, depending on the required positioning.
Remove the four bolts (C), move into position and
remount the bolts.
3. Place the seat adapter in the interface and push
it all the way back, until it „clicks” into place (D).
4. Lock the red, adjustable handle tightly once the
chair is positioned correctly. The red handle can
be adjusted to fasten more or less. Loosen the
screw and move the handle closer to or further
away from the seat.
Do NOT use the first hole the seat „clicks” into.
This is just the „safety hole” which will „catch”
the seat if the knob accidently should pop out
of the correct hole.
In some cases it might be neccessary to dis-
mount the metal plate (F) beneath the seat
base, to be able to mount the interface cor-
rectly.
Caution
Be careful not to get your fingers caught
GB