R82 Mustang Скачать руководство пользователя страница 4

Страница: 4 / 24

WARRANTY

R82 offers a 2-year warranty against defects in workmanship and materials and a 5-year

warranty on breakage of the metal frame caused by defects in welds. The warranty would

be adversely affected if the customer’s responsibility of servicing and/or daily maintenance

is not carried out according to the guidelines and intervals prescribed by the supplier and/

or stated in the manual. For further information, we refer to the R82 homepage/download.

The warranty can only be sustained if the R82 product is in use in the same country where

it was purchased and if the product can be identified by the serial number. The warranty

does not cover accidental damage, including damage caused by misuse or neglect. The

warranty does not extend to non-durable parts, which are subject to normal wear and

tear and need periodic replacement. The warranty is null and void if non-original R82

parts/accessories are used, or if the product is repaired or altered by anyone other than

an authorised R82 representative or by trained personnel officially recognised by R82 for

repair and maintenance of R82 products. R82 reserves the right to inspect the product

being claimed for and the relevant documentation before agreeing to the warranty claim,

and to decide upon whether to replace or repair the defective product. It is the custo-

mer’s responsibility to return the item being claimed for under warranty to the address of

purchase. The warranty is given by R82 or, subsequently, an R82 dealer.

TOOLS

Enclosed please find the 5 mm Allen key.

SECURITY PRECAUTIONS

•

Read this manual carefully before use and keep it for future reference. The user’s

safety may be affected if you do not follow the instructions in this manual.

•

Adjustments which are not described in this manual must only be made by authorized

R82 personnel.

•

This product is CE-marked which certifies that it meets all relevant European safety

requirements. The Mustang is tested and approved to EN 1985. Remove the CE-

mark when rebuilding the product or when using other than original R82 spare parts

and fittings.

•

The maximum service life of this product is 5 years when it is used on a daily basis.

Hereafter the product must be renovated (by R82 personnel) to extend the lifetime.

•

Never leave the user unattended in this product. Ensure permanent supervision by

an adult. Incorrect use of this product may cause serious injury to the user.

•

This product is constructed for one user only. Do not place more than one user in this

product.

•

If the user is close to the max. load/height indication and has a lot of involuntary

movements e.g. rocking, a larger size with higher max. load should be considered.

•

Take care that all the fixations and adjustments are placed and fitted correctly and

checked before every use.

Содержание Mustang
























Результаты поиска

Содержание Mustang

Отзывы:

R82 Mustang, Руководство пользователя, Страница: 4 / 24

Результаты поиска

Содержание Mustang

Отзывы: