26
E
N
R82 Warranty
R82 offers a 2-year warranty against defects in workman
-
ship and materials and a 5-year warranty on breakage of
the metal frame caused by defects in welds. The warranty
would be adversely affected if the customer’s responsibility
of servicing and/or maintenance is not carried out according
to the guidelines and intervals prescribed by the supplier
and/or stated in the User Guide. For further information, we
refer to the R82 homepage/download.
The warranty is only granted in the country where the prod-
uct was purchased and if the product can be identified by
the serial number. The warranty does not cover accidental
damage, including damage caused by misuse or neglect.
The warranty does not extend to consumable items e.g.
tires or upholstery, which are subject to normal wear and
tear and need periodic replacement.
The warranty is null and void if other than original parts/ac-
cessories are used, or if the product has not been main-
tained, repaired or altered according to the guidelines and
intervals prescribed by the supplier and/or stated in the User
Guide. R82 reserves the right to inspect the product being
claimed for and the relevant documentation before agreeing
to the warranty claim, and to decide upon whether to replace
or repair the defective product. It is the customer’s respon
-
sibility to return the item being claimed for under warranty to
the address of purchase.
Enclosed tools:
•
4,5 and 6 mm Allen key
•
10 and 13 mm spanner
The latest version of the User Guide is always available on-
line: www.R82.org
Disposal
When a product reaches the end of its lifetime, it should be
separated by material type so that the parts can be recycled
or disposed of properly. If required, please contact your lo-
cal dealer for a precise description of each material. Please
contact your local authorities to be informed of the options
available for recycling in an environmentally-friendly way.
Declaration of Conformity
This product conforms to the requirements of the Medical
Devices Directive (93/42/EEC). The CE mark must be re-
moved when rebuilding the product, when used in combina-
tion with a product from another manufacturer or when us-
ing other than original R82 spare parts and fittings. Further,
this product conforms to the requirements according to:
•
EN 12183
•
Never leave the user unattended in this product. En-
sure permanent supervision by an adult
•
Repair/replacements must only be made using new
original R82 spare parts and fittings and carried out in
accordance with the guidelines and service intervals
prescribed by the supplier
•
If there is any doubt as to the continued safe use of your
R82 product or if any parts should fail, stop using the
product immediately and contact your local dealer as
soon as possible
•
Always use the product in a moderate pace. Do not run
with the product
•
Information about transportation can be found in the
document “Transportation in Motor Vehicles” supplied
with the product
•
Information about roadability can be found in the docu-
ment “Roadability” supplied with the product
Environment
•
Observe the surface temperature on the product, be-
fore placing an user in it. This goes especially for users
with insensitive skin as they can not feel the heat. If
the surface temperature is above 41°C then allow the
product to cool before use
User
•
If the user is close to the max. load limit and/or has
a lot of involuntary movements, e.g. rocking, a larger
size with a higher max. load or a different R82 product
should be considered
•
For transportation the product is suitable for children in
the weight range of 22 kg to specified max user weight
for transportation.
Product
•
Carry out all positional adjustments on the product and
accessories and ensure that all knobs, screws and
buckles are securely fastened before use. Keep all
tools out of the reach of children
•
Ensure the stability of the product is maintained before
placing the user in it
•
Inspect the product and all of its accessories and re-
place any worn out parts before use
•
Do not expose the piston rod to scratches etc. It is im-
portant to use a cloth or the like, if tools are used to
adjust the gas spring
•
This product is tested for resistance to ignition at level
non-ignition in accordance with EN 1021-1, EN 1021-2
and ISO 7176-16
•
The product might lose its flame resistant characteris
-
tics if using other than original R82 cushions.
Safety
General Safety
•
Signs, symbols and instructions placed on this product must nev-
er be covered or removed and must remain present and clearly
legible throughout the entire lifetime of the product. Immediately
replace or repair illegible or damaged signs, symbols and instruc-
tions. Contact your local dealer for instructions.
•
Any adjustments and addition of accessories which
are not described in this manual, must only be made
by authorized R82 personnel. Vests and belts must be
mounted according to the instruction provided with the
products.
Caregiver
•
Read the “User Guide” carefully before use and keep it
for future reference. Incorrect use of this product may
cause serious injury to the user
•
Always use the correct lifting techniques and aids for
this purpose
Содержание multi frame Series
Страница 32: ...32 E N ...
