R82 combi frame, Руководство пользователя

Страница: 27 / 32

27
2 x
2 x
B
A
C
A
D
B
55°
30°
75°
E
15° 15°
D
G
1,2 m
65 cm
40 cm
F
G
B
TRANSPORTATION
IN MOTOR
VEHICLES 3/3
Placing the Combi Frame in the vehicle:
1. By use of a 4-point strap system, the frame is secured in
the vehicle. (Follow instructions from the manufacturer
of the vehicle).
A 4-point strap-system, approved according to ISO
10542-2, must be used.
On the rear of the frame, fitting A:
2. * Remove the plugs.
* Place the fittings (A) on the rear bar.
* Mount with the enclosed 6 mm long bolts and nuts.
(Note the placement for the different sizes.)
On the front of the frame, fitting B:
3. * Remove the plugs (D) in the side rails.
* Slide the thread block into the side rails.
* Mount the plugs (D) again.
* Place the fitting (B) over the thread block.
* Tighten with the enclosed 6 mm. bolts and washer
through the holes in the thread block. It is important
that the 'legs' on the fitting (B) is placed in the holes in
the side rails.
The fitting (B) can be turned upwards (as on the dra-
wing) or downwards if you wish.
4. The wheelchair is fastened in the vehicle by use of a
4-point strap-system. Either a hook or a strap can be
used for fastening the fittings (A) and (B).
Stick the enclosed stickers (C) on the four fittings (A)
and (B).
Secure the user in the wheelchair:
5. Use the 3-point belt as shown on drawing (D).
6. The angle on the 3-point belt must be as shown in
drawing (E).
7 The belt restraints should be adjusted as tightly as
possible, consistent with user comfort. Also the belt
webbing should not be twisted when in use.
8 We recommend a seat angle of 90° and 3° for the
back,
The 3-point belt must be installed on the inside of
the side rails. See drawing (F)
Use a 3-point belt wich conforms the requirements
according to ISO 10542-1.
9. Transportation:
* Remove all accessories from the wheelchair before
transportation.
* Place the user in a forward-facing position.
* The wheelchair is approved for transporting a maximum
user load of 100 kg.
Be aware of the recommended safety zone (G)
when transporting wheelchair-users in vehicles.
GB
Size 1+2
Size 3+4