Eurgle 2.4Ghz 3 Ch LCD Wheel
Digital Programmable Radio Gear
rcps2805004
Join our FREE Membership and accept 10%off Offer!
R2hobbies.com
Fail Safe Function
Function
Failsafe aims to prevent out-of-control driving of RC Car or RC Boat. If the Receiver is not able to
receive any signal, from the control to Throttle, the parameter of Throttle on Receiver will turn back
to its original setting.
Setting
1.
Turn on the Transmitter switch
2.
Turn on the Receiver switch, the LED will be lighting
3.
Adjust Transmitter’s Throttle, make the car/boat to stop or flameout, then keep still.
4.
Press the “Setting” button on Receiver (as the picture below), the LED will be flashing, then stop
after 3 seconds around, which means setting finished.
Testing
1.
Turn on the Transmitter switch
2.
Turn on the Receiver switch
3.
Turn off the Transmitter switch
4.
Servo of Throttle will turn back to it’s original setting automatically
5.
Setting is successful if above procedures finished completely
Simulate Function
Function Introduction
This function is for the virtual RC racing through the computer, you can practice the racing from the
computer.
Operation Method
1.
Hook up the DSC port of your Transmitter to the USB adaptor (fs-sm 100) and plug the USB
adaptor into your PC notebook.
2.
Turn on the Transmitter.
3.
Open the VRC software
4.
Follow the on screen instruction to set.
Remark
The VRC software provided is free which is offer only one basic track and training ground.
You can download it from VRC Official Website :
http://www.virtualrc.com/
.
If you need any other track, please contact VRC Company, thank you!
We hope you’ll enjoy
R2hobbies.com
Product!
Do join our FREE membership for 10%off Offer!
