manualshive.com logo in svg

R.V.R. Elettronica VJ2000, Руководство пользователя

Поделиться
Скачать
R.V.R. Elettronica VJ2000 Скачать руководство пользователя страница 35

VJ2000

29 / 44

USER MANUAL

Rev. 4.0 - 26/02/01

7. Maintenance Procedure

7.1 Safety Procedures

WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING

When the amplifier is operational with the rear panel removed, lethal voltages are easily

accessible.
Use properly insulated tools for any calibration work and do not make contact with any internal

components.
Ensure that all high voltage components have been grounded (use an earthing stick).
Ensure that power has been disconnected from the unit before any maintenance work is

started.

FIRST LEVEL OF MAINTENANCE

7.2 Routine Maintenance

The only routine maintenance required by the amplifier is periodic changing of the fan,

air filter and removal of accumulated dust from inside the tube cavity and from the air filter.
The periods between routine maintenance will depend upon operating conditions, ambient

temperature, ambient dust levels and humidity. It is advisable to carry out preventative checks

at 3 month intervals and to change fans at least every 18 months, or before if they become

noisy or show signs of wear.
Periodic replacement of the tube will also be necessary.
The operating life of the tube is very dependant upon operating conditions, for example: line

voltage fluctuations over ±5%, temperatures over +30°C, high humidity, the presence of dust

and incorrect calibration of the amplifier will all result in a greatly reduced tube life.

SECOND LEVEL OF MAINTENANCE

7.3 Replacements of the Components

N.B. TO RE-ASSEMBLE THE UNIT, SIMPLY REVERSE THE SEQUENCE OF

OPERATIONS.

N.B. THE FOLLOWING PROCEDURE SHOULD ONLY BE CARRIED OUT BY QUALIFIED

PERSONNEL USING THE CORRECT TOOLS AND EQUIPMENT. UNQUALIFIED OR

INEXPERIENCED PERSONNEL NOT USING THE CORRECT TOOLS AND

EQUIPMENT CAN EASILY CAUSE DAMAGE TO THE UNIT WHICH WILL

IMMEDIATELY INVALIDATE THE GUARANTEE.

Содержание VJ2000















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды