R.V.R. Elettronica URP, Техническое руководство

Страница: 10 / 46

URP Technical and Maintenance Manual
R.V.R. Elettronica S.r.l. (Bo) Pag. 10
TABLE A
ELECTRICAL SPECIFICATIONS
DC Power Requirements 1 2 - 1 3 . 8 V , 2 . 2 A
(approx) at 10W or 1.7A
(approx) at 2.5W
Frequency Range from 87.5 to 108MHz
(other in request)
Frequency Range direct from front panel in
100KHz increments-shift 50KHz
Frequency Stability better than ±500Hz
Max Power Output 10W ±10% dependent on and
portionate to supplied DC
Volatge (12-13.8V allowed)
R.F. Output Connector S0239 (PL) type
Output Impedance 50 Ohm
Audio Inputs 2 Total, 5KOhm impedance,
unbalanced,balanced.
1 Standard stereo male XLR
which can be used either for
composite/wideband operation
or monaural operation
(switchable).
1 Standard mono male XLR
for direct microphone use with
built-in micro pre-amp and
limiter.
Input Level for Stereo Version 2Vrms for 100% modulation
Input Level for Mono Version 25mV rms for 100% modulation