manualshive.com logo in svg

R.V.R. Elettronica TRDS4002, Руководство пользователя, Страница: 23 / 46

Поделиться
Скачать
R.V.R. Elettronica TRDS4002 Скачать руководство пользователя страница 23

TRDS4002

19 /42

User Manual

Rev. 1.0 - 03/08/05

Up to 50 PSN’s can be programmed.  Programming is quite simple.  Enter the Time
(sec) (transmission time in seconds) of each PSN (it is advisable to enter a time of
less than 3 sec).  Edit the PSN, which may have a length of 8 characters, including
spaces.  Finally enable the PSN by double clicking on the 

Activate

 box of this PSN.

The number of the PSN page can be selected in the Page box (from 0-9), which can
be sent to the RDS by programming the PSN Plan.

Let’s see what the push buttons are used for.

Read One

 reads the PSN selected.

Read All

 reads all the PSN’s of the page selected.

Send One

 Page sends the PSN selected.

Send All

 Page sends all the PSN’s of the page selected.

Read Active

 reads the page being transmitted by the rds coder.

Send Active

 sends the page displayed, which will be immediately transmitted on

the rds coder.

Содержание TRDS4002















































Отзывы:

Нет отзывов