![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/ptx-lcd/ptx-lcd_user-manual_3097301036.webp)
PTX-LCD
32 / 58
User Manual
Rev. 2.3 - 18/07/07
R1
activation/deactivation of relay 1
R2
activation/deactivation of relay 2
VB
battery supply voltage (only with option
24 volts
).
OUT
open collector service output
7.2.2.8 SCA
In this menu one can read the modulation level due to SCA and RDS input
Figure 7-22
In the PTX-LCD there are three input connectors for subcarrier signals, called SCA1,
SCA2 and RDS. This menu displays the modulation levels (percentage and kHz) for
each of them
7.2.2.9 GenSt
General settings menu
Figure 7-23
Uart Adr
address (serial port and IIC protocol) of this device, selectable between
1 and 200. If the exciter is not networked in a transmission system, this
value shall be set to 1
Baud Rate
Baud rate of the serial port
MODEM
Configures the PTX-LCD for the use of a modem (present) or for direct
cable connection
JUMP
Shows the jumpers setting. The symbol X means that a jumper is closed,
the symbol - indicates its open. For the meaning of the jumpers setting
see chapter 10.7.1.
Содержание PTX-LCD
