26
/ 42
User Manual
Rev. 2.0 - 02/09/18
TEX30LCD/S
ELETTRONICA
5.3.5 Miscellaneous Menu (Mix)
This menu lets you set equipment address in an I
2
C bus serial connection:
Menu 9
IIC
I
2
C address setting. The I2C network address becomes significant when
the exciter is connected in an RVR transmission system that uses this
protocol. Do not change it unless strictly required.
PSW
Setting a numeric password of 4 characters.
At the time of purchase, the password is set to [0000] by default; this
configuration automatically disables the entry of the password in default
screen.
NOTE:
It is advisable to write down the password set, if you forget the
password it is not possible to recover it automatically. To recover the
password, contact Customer Service by sending the alphanumeric PUK code
of 6 characters generated automatically when entering the password.
5.3.6 Version Menu (Vrs)
This screen holds equipment version/release information::
Menu 10
Note that these are readings, rather than settings, and cannot be edited (note the
empty arrow).
Rel
Firmware release information.
Dat
Release date.
Tab
Shows table loaded in the memory.
5.3.7 Channels Menu (L&R)
Right and left channel input levels are displayed as horizontal bars as shown in
the figure below.
