background image

PTRL & RXRL LCD

5 / 44

User Manual

Rev. 1.2 - 31/01/05

3. First Aid

The personnel employed in the installation, use and maintenance of the device, shall
be familiar with theory and practice of first aid..

3.1 Treatment of electrical shocks

3.1.1 If the victim is not responsive

Follow the A-B-C's of basic life support
• Place victim flat on his backon a hard surface.
• Open airway: lift up neck, push forehead back (Fig. 3-1).
• clear out mouth if necessary and observe for breathing
• if not breathing, begin artificial breathing (Figure 3-2): tilt head, pinch nostrils,

make airtight seal, four quick full breaths. Remember mouth to mouth resuscitation
must be commenced as soon as possible

Figure 3-1

Figure 3-2

• Check carotid pulse (Fig 3-3); if pulse is absent, begin artificial circulation

(Fig. 3-4) depressing sternum (Fig. 3-5)

Figure 3-3

Figure 3-4

Figure 3-5

• In case of only one rescuer, 15 compressions alternated to two breaths.
• If there are two rescuers, the rythm shall be of one brath each 5 compressions.
• Do not interrupt the rythm of compressions when the second person is giving

breath.

• Call for medical assistance as soon as possible.

Содержание PTRL

















































Отзывы: