R-Tech TIG180PDC, Руководство по эксплуатации

Страница: 4 / 24

4
Introduction
The R-Tech Tig180PDC is a member of our field acclaimed family of welding products.
Premium features include: -
1. Inverter power source – more efficient to operate, provides smoother weld characteristics.
2. Pulse welding in DC Tig welding mode
3. HF Arc start – Easy arc striking and prolonged tungsten life
4. Slope up / slope down
5. Remote foot pedal option
6. Digital amp meter
7. Industrial 60% Duty cycle at 180 Amps @ 40C
Recommended Processes
The R-Tech Tig180PDC is recommended for the Tig welding processes within its output capacity of
180 Amps
Equipment Limitations
The R-Tech Tig180PDC is protected from overloads beyond the output ratings and duty cycle as
per machine specifications with thermostat protection of the output coils and rectifiers.
Welding Capability – Duty Cycle
The R-Tech Tig180PDC is rated at 180 Amps at 60% duty cycle on a ten minute basis. If the duty
cycle is exceeded a thermal protector will shut machine off until the machine cools.
Technical Specifications
Model No. R-Tech TIG180PDC
Input 240V AC 50/60Hz Fuse Slow-blow (16A Tig) (32A MMA)
MMA No-load Voltage 60V – 80V
Current Range 5A – 140A
Rated Output Current 140A
Duty Cycle 35%
DC TIG No-load Voltage 60V – 80V
Current Range 5A – 180A
Rated Output Current 180A
Duty Cycle 60%
Up-Slope Time 5 Seconds
Down-Slope Time 5 Seconds
Pulse Frequency Range 0.5Hz – 25Hz
Gas Post Flow Time 1 – 10 Seconds
Arc Starting Mode High Frequency
Gross Weight 16 KG
Insulation IP21S
Dimensions mm 425 x 195 x 310