14
13.
LED Display
3 digit LED meter is used to display the main amperage when welding
.
14.
TIG starting control
HF - Mode: The arc will automatically start when trigger pressed without touching
tungsten electrode to workpiece
Lift - Mode: The arc will start by touching the tungsten electrode to work piece, when the
tungsten is then lifted of the work piece the arc will start. Used for when welding on
vehicles with sensitive electronics.
15.
Pre-flow gas
This sets the amount of time gas flow will happen before arc is started, for most jobs 0.1
-0.5 seconds if fine, when welding stainless steel etc. where a longer gas purge time
may
be required adjust accordingly. Range is 0 to 5 seconds.
