R-Tech TIG 500 AC/DC, Руководство по эксплуатации

Страница: 25 / 34

23
4.1.1 TIG210
The machine is designed to operate on a 240v
+/- 15% input single phase AC outlet.The
machine is supplied with a heavy duty 15A input
plug. Ensure that there is adequate ventilation
around the machine when it is connected to
the mains power supply.
4.2 Shielding Gas
When working the machine in the TIG mode
of welding the process requires a shielding gas.
The shielding gas can be supplied via a pressure
regulator to the machine from either a fixed
installation or single cylinder of gas.
If a cylinder of gas is used, please ensure that
the cylinder is securely fastened (refer to the
section on cylinder handling and safety), before
starting any welding operation.
Refer to the application section for the
selection of the correct shielding gas.
4.3 TIG Torch Connection
1. The W26F/FX AC/DC TIG torch is fitted to
the machine by means of the dinse back end.
For DC (-) TIG operation fit the torch back end
to the negative dinse connection (similarly for
DC (+) fit the torch
backend to the positive dinse connection).
2. The gas hose is fitted to the gas fitting (GAS)
located on the front bottom panel of the
machine.
4.4 MMA Operation
The R-Tech AC/DC range can
be used as a MMA welding machine by fitting a
electrode holder and a work return lead to the
respective dinse connectors (dependant on the
type of electrodes being used. Please consult
the packaging supplied by the manufacturer for
the correct polarities).
4.0 Connecting your R-Tech
TIG AC/DC machine
4.1.2 TIG320
The machine is designed to operate on a 415v
+/- 15% input three phase supply.
Ensure that there is adequate ventilation
around the machine when it is connected to
the mains power supply.
4.1 TIG500
The machine is designed to operate on a 415v
+/- 15% input three phase supply .
Ensure that there is adequate ventilation
around the machine when it is connected to
the mains power supply.