3
Thank you for selecting the R-Tech MTS 450 Inverter MIG Welder. We want you to take pride in
operating our MTS 450 as much pride as we have taken in making this product for you.
PLEASE EXAMINE CARTON AND EQUIPMENT FOR DAMAGE IMMEDIATELY
When this equipment is shipped, title passes to the purchaser upon receipt from the courier.
Consequently all claims for material damaged in shipment must be made by purchaser against the
transportation company used.
Please record your equipment identification below for future reference. This information can be found on
data plate at rear of machine.
Product MTS 450 SWFU
Serial No. ___________________________________
Date of Purchase _____________________________
Where Purchased _____________________________
Whenever you request replacement parts or information on this equipment please always supply
information you have recorded above
This product is covered by
3
years parts and labour warranty. External items, torch, earth lead etc are
covered by 3 months warranty. Any faults/damage found caused by customer will be charged pro-rata.
Please read this operator manual completely before attempting to use this equipment.
Pay particular attention to the safety instructions we have provided you for your protection
The level of seriousness to be applied to each section is explained below
Safety depends on you
Arc Welding and cutting equipment is designed and built with safety in
mind. However your overall safety can be increased by proper installation
and thoughtful operation on your part.
DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT WITHOUT
READING THIS MANUAL AND THE SAFETY PRECAUTIONS CONTAINED
THROUGHOUT.
And, most importantly, think before you act and be careful.
WARNING
This statement appears where the information must be followed exactly to avoid serious
personal injury.