4
Installation
Technical Specifications
Model No.
R-Tech C-MIG 315
Input
415V 3 ~ AC 50/60Hz
MIG Operation
Rated Input Power
6.2 KVA
Rated Input Current
18 AMPS
Rated Output Current
315 AMPS
Duty Cycle @ 315AMPS
40% @ 40
º
C
Duty Cycle @ 200AMPS
100% @ 40
º
C
Output current Range
40-315 AMPS
No Load Voltage
38V MAX
Voltage Adjustment Range
16V – 33V +/- 3V
Suitable Wire Diameter
0.8mm 1.0mm 1.2mm
Gross Weight
82 KG
Insulation
Class F
Safety Precautions
Read entire section before starting installation
WARNING!
Electric Shock can kill – Only qualified personnel should perform this installation. Turn off input
power at the fuse box before working on this equipment.
Do not touch electrically live parts. Always
connect the machine to an earthed mains supply as per national recommended standards.
Select suitable location
Place the welder where clean cooling air can freely circulate in and out of the front & rear louver
vents. Dirt, dust or any foreign material that can be drawn through vents into welder must be kept to
a minimum. Failure to observe these precautions can result in excessive operating temperatures
which can lead to plant failure.
Grinding
Do not direct grinding particles towards the welder. An abundance of conductive material can cause
plant failure.
Stacking
This machine cannot be stacked.
Содержание C-MIG 315
