Installation Procedure
IMPORTANT: ALLWAYS SWITCH OFF THE ELECTRICAL SUPPLY AT THE MAINS DURING INSTALLATION AND MAINTENANCE.
1. Before installation. Decide on a desired location for the mirror. Be mindful of hidden water pipes or electrical cables
behind the wall. It is recommended that infrared sensor (if applied) is kept a minimum distance of 150mm from the
adjacent wall.
2. Drill the holes in the wall for the screw plugs supplied in the fixing kit. Ensure the holes are horizontal using a spirit level.
Fasten the screws into the plugs leaving the screw head protruding about 10 - 8mm from the wall.
3. Unscrew the lid of the plastic box at the back of the mirror. Use the electrical connections found inside the box to
connect the mirror to the main supply in accordance with the current IEE regulations. Once the connection is made, screw
the lid back on the plastic box. Hang the mirror on the wall and switch on the electrical supply.
Unit 2 Bluebell Industrial Estate, Dublin 12
Tel: 01 450 4307 Email: [email protected]
www.rtlarge.ie
Colour coding:
L - Live = Brown
N - Neutral = Blue
E - Earth = Green & Yellow
