OPEN RECOVERY LID
1. Release both latches
"A"
on recovery tank lid.
(SEE BELOW)
2. Rotate lid fully open.
CLEAN "DRAIN SAVER"
WITH RECOVERY LID OPEN & TANK FULLY DRAINED
1. Remove 2" squeegee intake hose
"A"
from
"Drain Saver"
strainer
"B"
. (SEE
BELOW
)
2. Remove stainless screen, dispose of debris.
3. Rinse screen with fresh water from the outside
to the inside holding screen upside down.
This will allow for better cleaning.
4. Replace the screen into the bracket.
5. Replace 2" squeegee intake hose.
FLUSH RECOVERY TANK
1. Rinse the recovery tank after every use. This will
prevent heavy buildup on the bottom of the tank,
foul odors, and clogging of the drain hose.
(SEE
BELOW
)
3. After rinsing, reattach drain hose "
B"
on hook.
(SEE BELOW)
CLEAN VAC SCREEN
WITH RECOVERY LID OPEN & TANK FULLY DRAINED
1. Remove vac screen retaining clip
"A
".
(SEE
BELOW
)
2. Pull vac screen and float ball assembly
(B)
off
the vac box.
3. Rinse with hot water.
4. Dry thoroughly.
5. Replace vac screen onto box.
6. Replace and tighten retaining clip.
A
B
A
B
A
PAGE 17
B