DECK HEIGHT
ADJUSTMENT
VAC MOTOR
(SEE BELOW)
SOLUTION FILTER
1. The machine is equipped with a 24 volt, 3/4 hp,
vac motor
"A"
.
2. If foam or water gets past the recovery tank's vac
screen/ball system the
"UNLOADER VALVE"
"B"
will drain
it from the
"VAC BOX"
"C"
.
3. The vac motor has an "optional"
"FOAM MUFFLER"
"D"
available for quiet machine operation.
1. The solution system has a
"INLINE FILTER"
"A"
to filter
out cleaning solution prior to scrubbing.
(SEE
BELOW
)
CLEANING
SOLUTION FILTER
(SEE BELOW)
1. To clean the "
SOLUTION FILTER"
Unscrew the clear
cap
"A"
from housing
"B"
and remove the
"STAINLESS
STEEL"
screen
"C"
.
2. Rinse any debris from the screen with clean water.
3. Reinstall screen and screw cap back on tightly.
PAGE 19
B
C
A
A
A
B
D
C
1.
T
o adjust deck height for brush clearance,
loosen jam nut on adjustment bolt
"A",
turn
adjustment bolt clock-wise to raise deck,
counter-clockwise to lower deck.
Retighten jam nut.
(SEE BELOW)
A
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
