Cleaning & changing the injector nozzle
Cleaning/Changing the injector nozzle
1.
Unscrew the injector nozzle (2) from the ST-73 foam
lance (1)
2.
Check to see whether the injector nozzle (2) is only
lightly soiled, in which case careful cleaning by inserting
a suitable piece of wire or similar, will usually clear the
problem. It is recommended to rinse the injector nozzle
under clean running water and the nozzle should be
aligned with the direction of the water throughput.
3.
In the event of high soiling, dirt or damage the only
remedy is to exchange the injector nozzle (2).
Technical Data
Model
ST-73
Max Pressure
300 bar
Min Pressure
70 bar
Max Flow 1.25 Nozzle
12lpm
Max Flow 1.8 nozzle
27lpm
Weight
0.5kg
Parts Available
ST-73, 1.25 + 1ltr
200073500
ST-73, 1.25 + 2ltr
200073510
ST-73, 1.8 + 2ltr
200073610
Foam Pad/Filter
GS25151251
Spare 1ltr Bottle
020073513
Spare 2ltr Bottle
020073520
1.25 Injector Nozzle
040073502
1.8 Injector Nozzle
040073511
Tel:
01768 865985
Fax:
01768 890033
Email:
Website
: www.gspen.co.uk
