Version 08.02.2019
CAM(V98)/(V50+V41)
RL3-SY3
P
a
g
e
9
2.3.2.
Separate head unit with tablet monitor
Connect the female picture signal cable’s
WATERBLUE
coloured HSD+2 connector to
the male
WATERBLUE
coloured HSD+2 connector of the video interface.
Disconnect the
CURRY
coloured female 4pin HSD connector of the factory harness at
the rear side of the monitor and connect it to the male
WATERBLUE
coloured HSD
connector of the enclosed 4pin HSD LVDS cable.
Connect the female
WATERBLUE
coloured
HSD connector of the enclosed 4pin HSD
picture signal cable to the previously become free male
CURRY
coloured HSD
connector at the monitor’s rear side.
Caution: The picture signal cable has to be connected to the monitor.
Connection to the
head unit may cause damage to the system!
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given information has to be verified
by the installer.
