Version 14.02.2018
HW:
GD(V97)/(V33)
RL3-MIB-4
P
a
g
e
7
1.5.
Settings of the 4 Dip switches (CAN functions – red)
All 4 dip-switches of the video interface have no function for
normal use and have to be set to OFF (except Porsche vehicles with
PCM 4.0).
Dip position down is ON and position up is OFF.
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
All vehicles
OFF
OFF
OFF
OFF
Porsche with PCM 4.0
OFF
ON
OFF
ON
After each Dip-switch-change a power-reset of the Can-box has to be performed!
2.
Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
The interface is supposed to be installed at a suitable location behind the vehicle`s head-
unit.