Version 29.01.2020
HW: CAM (V97)/ (V52)GD
RL3-MBN51
P
a
g
e
5
1.3.
Connection Video-Interface
The video-interface converts the connected after-market sources video signals into a digital
RGB signal which is inserted in the factory monitor using separate trigger options.
Furthermore, it reads vehicle’s digital signals out of the vehicle’s CAN-bus system and
converts them for the video interface.
1.4.
Dip-switch settings (black)
Some settings must be selected by the dip-switches on the
video-interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
After each Dip-switch-change a power-reset of the Interface-box has to be performed!
Dip
Function
ON (down)
OFF (up)
1
No Function
Set OFF
2
Video 1
enabled
disabled
3
Video 2
enabled
disabled
4
No Function
Switch to OFF
5
Rear-view cam type
After-Market
Factory or none
6
Monitor
selection
Try all possible combinations of dip 6, 7 and 8 to find the
best picture (quality and size)
7
8
