36
EN
TURBO 2000
If there are no containers or if the container is not suitable for cooking
on an induction plate or if you move the container from its position
during cooking, the display will show error code “E0“ (see the “Failure
display and Inspection“ paragraph)
The appliance turns off after about 30 seconds if a suitable container is
not positioned correctly.
The plate (2) heats up
during functioning.
The hot indicator
lamp (S) turns on
as soon as the plate
reaches 80°C.
P a y m a x i m u m
attention.
Burns and scalds
danger!
“POWER” function
•
Press the “POWER“ button (5); the plate turns on.
•
The display shows the default value “1600W“; rotate the knob (11) to set the desired
power (the settable range goes from 200W to 1800W).
•
The plate works until when the knob (11) is pressed.
•
It is possible to press the “TIMER“ button (10) to set the desired functioning time (the
settable range goes from 1 minute to 3 hours); when the set time ends, the appliance
turns off.
“TEMP” function
•
Press the “TEMP“ button (6); the plate turns on.
•
The display shows the default value “220°C“; rotate the knob (4) to set the desired
temperature (the settable range goes from 60°C to 240°C).
•
The plate works until when the knob (11) is pressed.
•
It is possible to press the “TIMER“ button (10) to set the desired functioning time (the
settable range goes from 1 minute to 3 hours); when the set time ends, the appliance
turns off.
Timer
hon indicator lamp
Max Power
S
2
Содержание TURBO2000
Страница 2: ......
