R for Rabbit Hide & Seek Скачать руководство пользователя страница 3

Страница: 3 / 5

to fold

to unfold

3. Pull the band in the centre of the base upwards.

4. Locate the locking catch at the centre of each side rail. Press the release

button located on the underside of the rail.

Continue to press the release button whilst gently lowering the side rails.

3. With the feet on the floor pull the feet apart so that they are

approximately 60cm/ 24” apart. Lift the smaller sides upwards until they

lock into position. Repeat for the longer sides.

4. Push the floor centre until it is completely flat and stable.

CLICK

PUSH

WARNING! If the top rails do not release, ensure that the base is raised fully and lift the

rails slightly before pressing the release button.

CLICK

PULL

Содержание Hide & Seek

Страница 2: ... vertical position and open the touch fasteners to remove the mattress 5 With the upper part of the travel cot in the closed position push all four feet together Wrap the mattress around the travel cot with the padded section facing inside 6 Fasten the touch fasteners and secure Place back into the travel bag ...

Страница 4: ...ion The cot is now ready for use Ensure all locking mechanisms are engaged before use 1 Undo the four velcro tabs from underneath the travel cot 5 Place the mattress in the cot with the padded side up Insert the four velcro tabs through the slots in the base of the cot 2 Remove the velcro tabs from the base of the cot and remove the ...

Страница 5: ...cond layer Additional purchase Fit the tubes together Take off the mattress Place the mattress support inside the cot ensuring that all the hooks are hooked over the top rails Now place the mattress inside the support ...