R for Rabbit Hide & Seek Скачать руководство пользователя страница 1

Instruction Manual

IMPORTANT: KEEP FOR FUTURE REFERENCE. READ CAREFULLY.

care

Safety

 

 

Maintenance

All assembly fittings should always be tightened properly and fittings should be

checked regularly and retightened as necessary. Do not use this product if any

part is broken, torn or missing and use only spares provided by the manufacturer.

Cleaning

Be aware of the risk of open fire and other sources of heat, such as electric bar

fires, gase fires etc. in the vicinity of the cot.

Do not leave anything in the cot, such as toys, or place the cot close to another

product, which could provide a foothold or present a danger of suffocation or

strangulation, e.g. strings, blind/ curtain cords etc.

Do not use more than one mattress in the cot.

The depth of the mattress should not reduce the side height above it to less than

500mm.

Keep your travel cot away from trailing cords or flexes.

The cot is ready to use only when all locking mechanisms are engaged. Always

check that the rails are fully engaged before use.

To prevent enjuiry from falls, if the child can stand unaided or is able to climb out

of the cot, the cot shall no longer be used for that child.

Do not allow young children to play unsupervised in the vicinity of the travel cot.

For correct and safe fitting of a mattress to be used with this product, the

mattress must be maximum 980mm in length and 670mm in width, and minimum

950mm in length and 640mm in width.

This travel cot complies with EN 716-1:2008+A1:2013.

To clean the mattress base and travel cot fabric, wipe using a mild detergent

and water. Never clean with abrasive, ammonia based, bleach based or spirit

type cleaners. The product must be dried thoroughly before use or storage.

Designed and Imported by 
R for Rabbit Baby Products Pvt Ltd.
A1-305, Palladium, Near Makarba Crossing, 
Makarba,
Ahmedabad, Gujarat, 380051
India
Customer care: +91-79-30447126
Email: [email protected]

Hide & Seek – The Portable Baby Cot 

Содержание Hide & Seek






Отзывы: