
Chrysler Pacifica Minivan
R.A.SH Tronics
Department of R&D
3
TO OUR VALUED CUSTOMER
It is our intention to provide our valued customers with the best documentation possible to ensure successful use
of our products. We will continue to improve our publications to better suit your needs. Our publications will be
refined and enhanced, as new volumes and updates introduced. If you have any questions or comments regarding
this publication, please contact us.
We welcome your feedback.
CUSTOMER CARE CENTER
For additional application assistance, we urge you to consult with our experienced staff in our Customer Care
Center. Our Technical and Engineering staff has extensive test, research and development capabilities, and have
assisted many customers in solving unique design and application problems with standard or customized products.
R&D Contact Address
US Support Contact Address
R.A.SH Tronics Ltd
Clock Mobility
6700 Clay Ave. SW
Grand Rapids, MI 49548
(616) 698-9400
ABSTRACT
This guide explains how to install the modules in the vehicle.
v
The information provided in the wiring diagrams is vehicle specific. It should be applied only to the vehicle
indicated. Depending on the system you are installing, you may not install every harness.
v
Read modules placement first, it is very important to understand were to connect and fit the CAN-Bus
based components to avoid future problems.
v
This manual becomes an integral part of the vehicle the system-installed in. You should therefore always
keep it in the vehicle and pass on to the new owner, to safely use the systems.
v
R.A.SH Tronics Ltd reserve the right to make changes in product specifications at any time and without
prior notice. The information in this manual, believed to be accurate and reliable. However, R.A.SH Tronics
Ltd assume no responsibility for its use.
USEFUL HINTS
v
The electronic control board is an electrostatic sensitive device. Connect to a proper ground.
v
Use care when making electrical connections. Disconnect battery power prior to servicing.
v
When installing, check for any obstructions such as Gas tank, Gas lines, Wires, etc. before drilling or
routing power cable.
v
For continued protection against fire hazard, replace only with the same type and rating of fuse.
v
Only allow R.A.SH Tronics factory trained technicians to install or service your system. If wear is
observed on any part in the system, contact our US support.