QYT KT-8900D, Руководство пользователя

Страница: 17 / 41

BASIC SHORTCUTS AND USE | 13
D Channel (MR) mode
The use of Channel (MR) mode is dependent on
actually having programmed in some channels to
use. To
find out more on how to program channels
see Chapter Programming.
Once you have channels programmed and ready,
you can use the
[UP Y ] and [DOWN Z ] keys to
navigate between channels (or Rotate the Selec-
tor Knob).
!If you have channels programmed with Transmit
power set to Low, you can use the key to momen-
tarily switch over to high power if you're having
trouble getting through.

Monitor Both VFO & MR Modes
You can toggle from VFO and MR (Memory Re-
call) mode by either pressing the
[V/M] button on
the front of your radio, or you can toggle modes
from the Handheld Mic by a long press of the
[MENU] button.
The VFO/MR mode will only toggle on the current
selected A/B/C/D line
– while the other channel
lines will remain on channel or memory mode as
they were selected.
This allows you to monitor channel and fre-
quency mode simultaneously.