Qwic Premium MN8B, Руководство пользователя

Страница: 31 / 76

31
NE
DE
RL
AND
S
ENGLI
SH
DEU
TS
C
H
2.2. Adjusting the saddle
Your saddle height can be adjusted by inserting an Allen key into point
A. Make sure you don't exceed the maximum saddle height. To find the
correct height, sit on the saddle and rest your foot on the pedal (in the
lowest position). In this position, your knee should be slightly bent. If you
are able to reach the ground with your foot flat on the floor, your saddle
is too low.
The angle and horizontal position of your saddle can be adjusted by
inserting the Allen key into Point B. If something is unclear or you need
assistance, do not hesitate to ask your dealer for advice.
info
If you can rest your feet flat on the ground while sitting on
your saddle, you should raise it.
bell
Do not forget to tighten the bolts and make sure that your
seat is firmly locked in place after making adjustments!
A B
2. FIRST STEPS
2.3. Adjust the handlebars
You can raise or lower the handlebar by slightly loosening bolt C. After
making adjustments, retighten the bolt. The handlebar can also be
angled according to your needs. Loosen the bolts indicated with D,
re-position the handlebar and retighten the bolts.
Please note that a (very) large distance between the saddle and the
handlebar can result in neck-, back-, and shoulder pain. We recommend
that you consult your dealer for a proper setup of all components on
your e-bike.
2.4. Adjusting the grips
To adjust the position of the grips to your liking, loosen the screws E on
both sides as indicated below with an Allen key. Adjust the grips simply
by rotating them.
bell
Do not forget to securely tighten the bolts after adjusting your
handlebar and grips.
E
C
D
E