background image

39

To Use Call Rejection

1. To block unwanted calls, dial *60 and follow the record instructions.
2. If you do not know an unwanted callers number, activate Call Rejection imme-

diately after hanging from their call.

3. To cancel Call Rejection, pres *80.

Call Trace

With Call Trace you can receive assistance from Qwest or your local police
department if you receive harassing obscene telephone calls. This service is
available to most customers on a pay per use basis.

To Use Call Trace

1. Dial *57 immediately after hanging up from the call to be traced.
2. Follow the recorded to take appropriate action.
3. The telephone number of the caller will be recorded by Qwest. Deterrent action

can be taken by Qwest or your local law enforcement agency after 3 calls from
the same number are identified.

4. You will not be given the name or telephone number of the person who called

you.

5. If it becomes a life threatening situation contact the police immediately.

Priority Call

To Use Priority Call

1. You can store up to 15 different numbers.
2. To establish or change your priority, simply dial *61 and follow the recorded

instructions.

3. To cancel Priority Calling, press *81.

Selective Call Forwarding

Selective Call Forwarding transfers calls from specific numbers to another phone
number of your choice.

To Use Selective Call Forwarding

1. Dial *63 and follow the recorded instructions.
2. To cancel Selective Call Forwarding, dial *83 and follow the recoded

instructions.

Speed Calling

Allows you to reach 8 or 30 frequently called numbers by dialing just one or two
digits instead of the entire phone number.

Additional Services

Additional Information

Содержание qw2652





















































Отзывы: