Qwest Q1960, Руководство пользователя

Страница: 14 / 46

10
B a t t e r y u s e t i m e ( p e r c h a r g e )
From fully charged
• Four hours continuous use.
• Seven days when the handset is in the standby mode.
W h e n t h e b a t t e r y c h a r g e b e c o m e s l o w
When the voltage of battery pack in the handset is very low and needs to be
charged, the phone is programmed to
eliminate functions in order to save
power. If the phone is not in use,
“
Low Battery
” flashes and
none of the keys will operate. If the phone is in use, “
Low Battery
”
flashes and the handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit for charging.
C l e a n i n g t h e b a t t e r y c o n t a c t s
To maintain a good charge, it is important to clean the battery
contacts on the handset and base unit about once a month. Use a pencil
eraser or other contact cleaner.
Do not use any liquids or solvents.
Even when the battery
pack is not being used, it
will gradually
discharge over a long
period. For optimum
performance, be sure to
return the handset to the
base unit after a
telephone call for
charging the battery.
C h a r g i n g o p t i o n a l b a t t e r y p a c k s
The base unit of your phone is equipped with a compartment for charging an
extra battery pack for use in your handset.
1. Pull the cover of battery charger.
2. Put the battery pack in the
compartment with contacts
facing down.
3. Replace the charger cover.
4. Charge the battery for more than
28 hours.
In the event of a power failure, your spare battery pack can be
used as a back-up power supply for the base unit.
QT1960_OM 4/6/01 5:27 PM Page 14