© Copyright Qvis ®. All documentation rights reserved.
20
Bridge
uses the WDS protocol that is not defined as the standard thus
compatibility issues between equipment from different vendors may arise.
Moreover, Tree or Star shape network topology should be used in all WDS use-
cases (i.e. if MASTER 2 and MASTER3 are specified as the WDS peers of
MASTER1, MASTER2 should not be specified as the WDS peer of MASTER3 and
MASTER3 should not be specified as the WDS peer of MASTER2 in any case).
Mesh and Ring network topologies are not supported by WDS and should be
avoided in all the use cases.
3.
Repeat the above procedures to configure the remote TT-208.
4.
Use the ping function to check whether the link between the two bridges is OK.
5.
To get better wireless connectivity, antenna alignment is strongly recommended
after both bridges are installed at a long distance apart.
6.
Open “
Antenna Alignment
” in
Tools
. Choose the remote peer and click on the
“
Start”
button.
Note:
